주요 콘텐츠로 건너뛰기

PSP 300x Casing Replacement

필요한 것

  1. PSP 300x Casing Replacement, Battery: 1 단계, 이미지 1/3 PSP 300x Casing Replacement, Battery: 1 단계, 이미지 2/3 PSP 300x Casing Replacement, Battery: 1 단계, 이미지 3/3
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

  2. PSP 300x Casing Replacement, Casing: 2 단계, 이미지 1/1
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  3. PSP 300x Casing Replacement: 3 단계, 이미지 1/2 PSP 300x Casing Replacement: 3 단계, 이미지 2/2
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

  4. PSP 300x Casing Replacement: 4 단계, 이미지 1/1
    • Next, unscrew the two screws located at the top of the PSP.

  5. PSP 300x Casing Replacement: 5 단계, 이미지 1/1
    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

  6. PSP 300x Casing Replacement: 6 단계, 이미지 1/2 PSP 300x Casing Replacement: 6 단계, 이미지 2/2
    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

결론

To reassemble your device, follow these instructions in reverse order.

다른 25명이 해당 안내서를 완성하였습니다.

kbrunner

회원 가입일: 11/05/09

72 평판

안내서 1개 작성함

Cal Poly, Team 19-2, Maness Fall 2009 Cal Poly, Team 19-2, Maness Fall 2009 회원

CPSU-MANESS-F09S19G2

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 13

7일 전: 64

30일 전: 261

전체 시간: 15,734