기기를 수리하세요 커뮤니티 상점

Palm IIIc Motherboard Replacement

소개

Follow this guide to remove and replace your Palm IIIc's motherboard.

필요한 것

  1. Palm IIIc Motherboard Replacement, Removing broken LCD screen: 1 단계, 이미지 1/1

    • Keep track of all pieces removed from the device.

    • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

    편집

  2. Palm IIIc Motherboard Replacement: 2 단계, 이미지 1/1

    • Using a Phillips head screwdriver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

    • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

    편집

  3. Palm IIIc Motherboard Replacement, Remove the Front and Back Covers: 3 단계, 이미지 1/1

    • Using a spudger, carefully pry open the front and back covers along the side seam.

    • A small sensor cover will fall out when the front and back covers are removed. Keep track of it.

    편집

  5. Palm IIIc Motherboard Replacement, Motherboard: 4 단계, 이미지 1/1

    • Screen-side down, unhook the battery cable from the motherboard.

    편집

  6. Palm IIIc Motherboard Replacement: 5 단계, 이미지 1/2 Palm IIIc Motherboard Replacement: 5 단계, 이미지 2/2

    • Unhook the blue and red screen cables.

    편집

  7. Palm IIIc Motherboard Replacement: 6 단계, 이미지 1/2 Palm IIIc Motherboard Replacement: 6 단계, 이미지 2/2

    • On the back of the motherboard near the top, gently lift up the flap that holds the ZIF connector tab in place. This will allow you to pull out the ZIF connector tab.

    편집

  8. Palm IIIc Motherboard Replacement: 7 단계, 이미지 1/3 Palm IIIc Motherboard Replacement: 7 단계, 이미지 2/3 Palm IIIc Motherboard Replacement: 7 단계, 이미지 3/3

    • Located near the bottom of the motherboard will be two ZIF connector tabs. Gently lift up the flap that secures these tabs and remove the tabs.

    편집

  9. Palm IIIc Motherboard Replacement: 8 단계, 이미지 1/1

    • Gently bend back the black clips that secure the motherboard.

    • Remove the motherboard starting from the left side and pull it out away from the clips.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Paulina Trujillo

회원 가입일: 04/07/11

265 평판

안내서 8개 작성하였습니다

배지: 7

배지 +4개 더

팀

Cal Poly, Team 20-69, Walters Spring 2011 Cal Poly, Team 20-69, Walters Spring 2011 회원

CPSU-WALTERS-S11S20G69

5 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,143