주요 콘텐츠로 건너뛰기

소개

A guide to replace a damaged, lost, or broken button cluster.

  1. Place the Palm IIIx face down on a flat surface.
    • Place the Palm IIIx face down on a flat surface.

  2. Push down and lift up the battery cover to remove it.
    • Push down and lift up the battery cover to remove it.

  3. Remove the old batteries one at a time.
    • Remove the old batteries one at a time.

  4. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  5. Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
    • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

  6. Hold the device on its side, positioning your hands as shown.
    • Hold the device on its side, positioning your hands as shown.

    • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers

  7. Hold the screen and front cover in a vertical position, facing the screen inward, as shown.
    • Hold the screen and front cover in a vertical position, facing the screen inward, as shown.

    • Position your hands so you can push the screen outward with your thumbs.

    • Remove the front cover by gently pushing outward with your thumbs. Use your index fingers to pull back on the front cover.

  8. Remove cluster by pulling on the rubber backing.
    • Remove cluster by pulling on the rubber backing.

    • Clean, repair, and/or replace as neccessary.

결론

To reassemble your device, follow these instructions in reverse order.

David Haskell

회원 가입일: 2010년 01월 21일

44 평판

안내서 3개 작성하였습니다

Cal Poly, Team 14-43, Regan Winter 2010 Cal Poly, Team 14-43, Regan Winter 2010 회원

CPSU-REGAN-W10S14G43

4 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,198