기기를 수리하세요 커뮤니티 상점

Palm Pre 2 Motherboard Replacement

소개

The following guide will show the reader how to properly remove the motherboard from the Palm Pre 2.

필요한 것

  1. Palm Pre 2 Motherboard Replacement, Motherboard: 1 단계, 이미지 1/2 Palm Pre 2 Motherboard Replacement, Motherboard: 1 단계, 이미지 2/2

    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

    편집

  2. Palm Pre 2 Motherboard Replacement: 2 단계, 이미지 1/3 Palm Pre 2 Motherboard Replacement: 2 단계, 이미지 2/3 Palm Pre 2 Motherboard Replacement: 2 단계, 이미지 3/3

    • Pull on the tab to remove the battery.

    편집

  3. Palm Pre 2 Motherboard Replacement: 3 단계, 이미지 1/2 Palm Pre 2 Motherboard Replacement: 3 단계, 이미지 2/2

    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

    편집

  5. Palm Pre 2 Motherboard Replacement: 4 단계, 이미지 1/2 Palm Pre 2 Motherboard Replacement: 4 단계, 이미지 2/2

    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas (Reference the red box in the image).

    • Use tweezers to remove the two antennas from the keypad control board.

    편집

  6. Palm Pre 2 Motherboard Replacement: 5 단계, 이미지 1/2 Palm Pre 2 Motherboard Replacement: 5 단계, 이미지 2/2

    • Use the opening tool to pry off the (black and yellow) back frame.

    편집

  7. Palm Pre 2 Motherboard Replacement: 6 단계, 이미지 1/3 Palm Pre 2 Motherboard Replacement: 6 단계, 이미지 2/3 Palm Pre 2 Motherboard Replacement: 6 단계, 이미지 3/3

    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

    편집

  8. Palm Pre 2 Motherboard Replacement: 7 단계, 이미지 1/1

    • Use tweezers to separate the keyboard from the phone.

    편집

  9. Palm Pre 2 Motherboard Replacement: 8 단계, 이미지 1/2 Palm Pre 2 Motherboard Replacement: 8 단계, 이미지 2/2

    • Use a Phillips #0 screwdriver to remove the remaining 4 screws from the main portion of the phone.

    • Use an opening tool to remove the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Cole Simmerman

회원 가입일: 01/08/18

160 평판

안내서 1개 작성함

배지: 2

팀

IUPUI, Team S1-G6, Freund Spring 2018 IUPUI, Team S1-G6, Freund Spring 2018 회원

IUPUI-FREUND-S18S1G6

2 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 7

전체 시간: 261