주요 콘텐츠로 건너뛰기

소개

Follow this guide if the battery is dysfunctional and you want to replace it.

부품

지정된 부품이 없습니다.

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  4. Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  5. Using metal tweezers, unplug small white plug. Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.
    • Using metal tweezers, unplug small white plug.

    • Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.

  6. Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.
    • Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.

    • The battery may be glued to the phone.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Clement Poisson

회원 가입일: 2010년 01월 26일

24 평판

안내서 7개 작성하였습니다

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010 회원

CPSU-MANESS-W10S13G23

4 회원들

안내서 16개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 4,974