주요 콘텐츠로 건너뛰기

Palm Treo 600 Front Case Replacement

필요한 것

  1. Palm Treo 600 Front Case Replacement, Back Case: 1 단계, 이미지 1/1
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Palm Treo 600 Front Case Replacement: 2 단계, 이미지 1/2 Palm Treo 600 Front Case Replacement: 2 단계, 이미지 2/2
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Palm Treo 600 Front Case Replacement: 3 단계, 이미지 1/2 Palm Treo 600 Front Case Replacement: 3 단계, 이미지 2/2
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. Palm Treo 600 Front Case Replacement, Front Case: 4 단계, 이미지 1/2 Palm Treo 600 Front Case Replacement, Front Case: 4 단계, 이미지 2/2
    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

결론

To reassemble your device, follow these instructions in reverse order.

Michael Polka

회원 가입일: 01/27/10

22 평판

안내서 1개 작성함

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010 회원

CPSU-MANESS-W10S13G23

4 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,567