소개

Replace the speaker

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  5. Using the spudger, pull the speaker straight up.
    • Using the spudger, pull the speaker straight up.

  6. Gently pull the rubber coating off of the speaker.
    • Gently pull the rubber coating off of the speaker.

결론

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

회원 가입일: 2010년 01월 26일

24 평판

안내서 7개 작성하였습니다

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010 회원

CPSU-MANESS-W10S13G23

4 회원들

안내서 16개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,452