Palm Treo 650 Case Replacement - iFixit 수리 안내서

소개

Need to access the interior. Here's how to take off the case to do that.

필요한 것

1 단계 Battery and Stylus

Palm Treo 650 Case Replacement, Battery and Stylus: 1 단계, 이미지 1/1

Position the phone so the screen faces down.
Remove the stylus found on the back of the phone.

2 단계

Palm Treo 650 Case Replacement: 2 단계, 이미지 1/1

Hold the button in the middle of the phone's back to remove the battery cover.
Slide the cover down to remove it, and set the cover aside.

3 단계

Palm Treo 650 Case Replacement: 3 단계, 이미지 1/2

Palm Treo 650 Case Replacement: 3 단계, 이미지 2/2

Lift the edge of the battery, separating contact points, and pull out as pictured.

4 단계 Case

Palm Treo 650 Case Replacement, Case: 4 단계, 이미지 1/1

Remove the round, rubber cover to expose a screw that will be removed in the next step.

5 단계

Palm Treo 650 Case Replacement: 5 단계, 이미지 1/2

Palm Treo 650 Case Replacement: 5 단계, 이미지 2/2

Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.
Remove the single 9.8 mm screw next to the antenna on the back plate, using a Phillips #00 screwdriver.

6 단계

Palm Treo 650 Case Replacement: 6 단계, 이미지 1/1

Pull the antenna outward to remove the antenna from the body of the phone.

7 단계

Palm Treo 650 Case Replacement: 7 단계, 이미지 1/2

Palm Treo 650 Case Replacement: 7 단계, 이미지 2/2

Pry the back cover off using an iFixit opening tool.
Several small clips on the inside attach to the back cover.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 14명과 함께

mmedrano

회원 가입일: 11/15/09

95 평판

안내서 2개 작성하였습니다

배지 +6개 더

팀

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 회원

CPSU-MANESS-F09S19G3

4 회원들

안내서 18개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 3,071