소개

Follow this guide to gain access to your Treo's motherboard.

부품

부품은 필요하지 않습니다.

Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

댓글 쓰기

Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

댓글 쓰기

  • Remove the stylus from the phone.

댓글 쓰기

  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

댓글 쓰기

  • Using the spudger, remove the small rubberized patch under the antenna.

댓글 쓰기

  • Unscrew the last two screws using the previous screw driver.

댓글 쓰기

  • Using the plastic opening tool, gently separate the back case from the phone body.

댓글 쓰기

  • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

댓글 쓰기

  • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

  • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

댓글 쓰기

  • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

  • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

댓글 쓰기

  • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

  • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Ivan

회원 가입일: 2012년 04월 29일

11 평판

안내서 2개 작성하였습니다

Cal Poly, Team 12-37, Regan Spring 2012 Cal Poly, Team 12-37, Regan Spring 2012 회원

CPSU-REGAN-S12S12G37

4 회원들

안내서 14개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 688