기기를 수리하세요 커뮤니티 상점

Palm Treo 755p Back Cover Replacement

소개

Remove the back cover to reveal internal components, such as the circuit board, keyboard and screen.

필요한 것

  1. Palm Treo 755p Back Cover Replacement, Battery: 1 단계, 이미지 1/3 Palm Treo 755p Back Cover Replacement, Battery: 1 단계, 이미지 2/3 Palm Treo 755p Back Cover Replacement, Battery: 1 단계, 이미지 3/3

    • Press the button on the back cover to release the battery cover.

    • Slide off the battery cover.

    번역하기

  2. Palm Treo 755p Back Cover Replacement: 2 단계, 이미지 1/2 Palm Treo 755p Back Cover Replacement: 2 단계, 이미지 2/2

    • Remove the battery by lifting up on one side.

    번역하기

  3. Palm Treo 755p Back Cover Replacement, Back Cover: 3 단계, 이미지 1/2 Palm Treo 755p Back Cover Replacement, Back Cover: 3 단계, 이미지 2/2

    • Remove the stylus by pulling up on the large top to reveal the top left case screw.

    • Pull away the black flap to reveal the top right case screw.

    번역하기

  5. Palm Treo 755p Back Cover Replacement: 4 단계, 이미지 1/1

    • Use a T5 screwdriver to remove the five 7 mm black/red back case screws.

    • Use a T5 screwdriver to remove the middle 3.1 mm screw.

    번역하기

  6. Palm Treo 755p Back Cover Replacement: 5 단계, 이미지 1/2 Palm Treo 755p Back Cover Replacement: 5 단계, 이미지 2/2

    • Use the plastic opening tool to pry open the device. Start on the volume control side (left side of the screen) and work your way up along the edge and across the top.

    • The side volume control buttons may fall out after opening the device.

    번역하기

  7. Palm Treo 755p Back Cover Replacement: 6 단계, 이미지 1/2 Palm Treo 755p Back Cover Replacement: 6 단계, 이미지 2/2

    • Slowly unfold the back casing away from the front casing revealing the red and black wound wire speaker cable, marked by the red box.

    • Potential for device damage: Be gentle while separating the halves to prevent breaking the red and black wound wire speaker cable that bridges both halves.

    번역하기

  8. Palm Treo 755p Back Cover Replacement: 7 단계, 이미지 1/3 Palm Treo 755p Back Cover Replacement: 7 단계, 이미지 2/3 Palm Treo 755p Back Cover Replacement: 7 단계, 이미지 3/3

    • Using tweezers, squeeze the plastic head of the black and red wound wire cable. This will detach the cable from the circuit board and fully separate the two halves.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 10명과 함께

Mike Shaw

회원 가입일: 01/03/11

601 평판

안내서 6개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team 14-6, Forte Winter 2011 Cal Poly, Team 14-6, Forte Winter 2011 회원

CPSU-FORTE-W11S14G6

6 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,537