기기를 수리하세요 커뮤니티 상점

Palm Zire m150 Headphone Jack Replacement

소개

This guide will teach you how to replace the audio on your Palm Zire m150. If you don't need to replace it, it will also teach you how to take the device apart in order to clean the control button.

필요한 것

  1. Palm Zire m150 Headphone Jack Replacement, Headphone Jack: 1 단계, 이미지 1/2 Palm Zire m150 Headphone Jack Replacement, Headphone Jack: 1 단계, 이미지 2/2

    • Remove cover, also known as the flap from the Palm Zire m150.

    • For the purpose of this guide and being able to see clearly, we removed the flap completely. You can keep your flap on if you wish.

    편집

  2. Palm Zire m150 Headphone Jack Replacement: 2 단계, 이미지 1/1

    • Remove both screws on the back.

    • Turn screw driver counterclockwise to remove screw

    • Be careful not to strip screws

    편집

  4. Palm Zire m150 Headphone Jack Replacement: 3 단계, 이미지 1/1

    • Remove the front part of the device from the bottom part of the device.

    • Separate front cover from back cover.

    • Be careful not to break the connector that connects the screen to motherboard.

    편집

  5. Palm Zire m150 Headphone Jack Replacement: 4 단계, 이미지 1/2 Palm Zire m150 Headphone Jack Replacement: 4 단계, 이미지 2/2

    • Insert NEW audio piece into the top case housing.

    • On the NEW audio piece, use a soldering iron to solder.

    • Let solder cool before reassembling unit.

    • Soldering iron needs time to warm up in order for use

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Kate

회원 가입일: 01/26/16

528 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

USF Sarasota-Manatee, Team 1-3, Stewart Spring 2016 USF Sarasota-Manatee, Team 1-3, Stewart Spring 2016 회원

USFSM-STEWART-S16S1G3

5 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 320