주요 콘텐츠로 건너뛰기

Palm m105 Motherboard Replacement

필요한 것

  1. Palm m105 Motherboard Replacement, Motherboard: 1 단계, 이미지 1/1
    • Start with your intact Palm m105.

  2. Palm m105 Motherboard Replacement: 2 단계, 이미지 1/1
    • Remove protective flap by pulling directly out from the top.

    • The two clips will pop out

  3. Palm m105 Motherboard Replacement: 3 단계, 이미지 1/1
    • Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.

    • The Faceplate will then easily lift off

  4. Palm m105 Motherboard Replacement: 4 단계, 이미지 1/2 Palm m105 Motherboard Replacement: 4 단계, 이미지 2/2
    • Using a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise.

    • The link to purchase this screwdriver is Located here.

  5. Palm m105 Motherboard Replacement: 5 단계, 이미지 1/1
    • This is what the device looks like once you have taken the screws out and opened the device.

  6. Palm m105 Motherboard Replacement: 6 단계, 이미지 1/1
    • The Motherboard and screen will pop out of the back case easily.

    • Be careful when doing this step, the components are fragile.

  7. Palm m105 Motherboard Replacement: 7 단계, 이미지 1/1
    • To remove the screen from the motherboard there are going to be three tabs that need to pulled up.

    • ** This step needs to be done with special care because it is very fragile.**

    • Once they are all three popped up the motherboard and screen will separate easily.

  8. Palm m105 Motherboard Replacement: 8 단계, 이미지 1/1
결론

To reassemble your device, follow these instructions in reverse order.

Aaron

회원 가입일: 10/04/11

7 평판

안내서 1개 작성함

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S1G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 1,058