Palm m105 case replacment

소개

This guide demonstrates how to replace the case of your Palm m105. The case on the Palm m105 can be easily removed, and a replacement shell casing can be used to replace your damaged one.

Before you begin this repair, power off your device and make sure it's unplugged from the charger.

필요한 것

1 단계 Palm m105 case replacment

Palm m105 case replacment, Palm m105 case replacment: 1 단계, 이미지 1/1

Remove the protective flip lid of the device. Open the lid and pull.
There are two clips that will pop out.

편집

2 단계

Unclip the tab at the top of the device, to remove the face plate.

편집

3 단계

Remove the batteries by opening the battery compartment on the back of the device.
Remove one battery at a time.

편집

4 단계

Using a T-5 Torx screwdriver, remove all four screws at the back of the device by turning them counterclockwise. A sample screwdriver is located here.

편집