Skip to main content

소개

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

부품

No parts specified.

  1. Set the switch on the battery door to "open," and open the door. Set the switch on the battery door to "open," and open the door.
    • Set the switch on the battery door to "open," and open the door.

  2. At the left hand side, locate the head of the metal bar that holds the spring in place.
    • At the left hand side, locate the head of the metal bar that holds the spring in place.

  3. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  4. Push the metal bar down using the metal tweezers.
    • Push the metal bar down using the metal tweezers.

  5. Pull the metal bar that holds the spring in place out.
    • Pull the metal bar that holds the spring in place out.

    • You can also use tweezers for this step, although we found it easier to just use our fingers.

  6. Remove the battery access door from the device.
    • Remove the battery access door from the device.

    • In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

결론

To reassemble your device, follow these instructions in reverse order.

Zhentao

회원 가입일: 2018년 01월 30일

229 평판

안내서 2개 작성하였습니다

Baylor, Team S2-G3, Johnson Spring 2018 Baylor, Team S2-G3, Johnson Spring 2018 회원

BU-JOHNSON-S18S2G3

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 55