기기를 수리하세요 커뮤니티 상점

Panasonic HDC-TM15 Side Cover Replacement

소개

Using this guide, a Panasonic HDC-TM15 owner will be able to remove the broken side cover of the camcorder and replace it with a new one.

필요한 것

  1. Panasonic HDC-TM15 Side Cover Replacement, Side Cover: 1 단계, 이미지 1/1

    • Using the Phillips #00 Screwdriver, unscrew the five .5 mm Phillips #00 screws on the hand-strap side of the camcorder.

    편집

  2. Panasonic HDC-TM15 Side Cover Replacement: 2 단계, 이미지 1/1

    • Next, unscrew the six .5 mm Phillips #00 screws on the bottom of the camcorder.

    편집

  4. Panasonic HDC-TM15 Side Cover Replacement: 3 단계, 이미지 1/3 Panasonic HDC-TM15 Side Cover Replacement: 3 단계, 이미지 2/3 Panasonic HDC-TM15 Side Cover Replacement: 3 단계, 이미지 3/3

    • By putting your hand through the hand-strap, tug on the side cover until it comes off completely.

    • Once the old cover is completely detached, set it aside.

    • The inside of your camcorder should now be completely exposed, as seen in the photos.

    편집

  5. Panasonic HDC-TM15 Side Cover Replacement: 4 단계, 이미지 1/2 Panasonic HDC-TM15 Side Cover Replacement: 4 단계, 이미지 2/2

    • Line up the new side cover in the exact same place, ensuring that the screw holes match.

    • Re-screw the side cover into place.

    편집

  6. Panasonic HDC-TM15 Side Cover Replacement: 5 단계, 이미지 1/1

    • Gently tug on the hand-strap to ensure that the screws are tight and the side cover is secure.

    • When the side cover is securely fastened, you have completed the side cover replacement of your Panasonic HDC-TM15 camcorder.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Tricia Fallo

회원 가입일: 03/11/15

210 평판

안내서 2개 작성하였습니다

배지: 2

팀

Marist, Team 1-4, Laflen Spring 2015 Marist, Team 1-4, Laflen Spring 2015 회원

MARS-LAFLEN-S15S1G4

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 300