기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Panasonic Lumix DMC-F7 Back Case Replacement

소개

Steps for removing the back half of the case and replacing it with a new one.

필요한 것

  1. Panasonic Lumix DMC-F7 Back Case Replacement, Battery: 1 단계, 이미지 1/1

    • Slide the lock switch to the right so that it is in the unlocked position.

    • Use your finger to slide the battery hatch in the direction of the downward arrow so that the hatch is open.

    • Both battery and memory card should now be visible.

    번역하기

  2. Panasonic Lumix DMC-F7 Back Case Replacement: 2 단계, 이미지 1/1

    • Open the battery hatch and then the black cover to expose the battery compartment.

    • The camera used to create these repair guides did not have a battery and memory card.

    • Remove the battery.

    • When installing the new battery, ensure it is in the same orientation as before.

    번역하기

  3. Panasonic Lumix DMC-F7 Back Case Replacement, Back Case: 3 단계, 이미지 1/1

    • Remove the two 2.8 mm Phillips screws.

    번역하기

  5. Panasonic Lumix DMC-F7 Back Case Replacement: 4 단계, 이미지 1/1

    • Use a Phillips screwdriver to remove the three 2.8 mm screws on the bottom of the camera.

    번역하기

  6. Panasonic Lumix DMC-F7 Back Case Replacement: 5 단계, 이미지 1/1

    • Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

    번역하기

  7. Panasonic Lumix DMC-F7 Back Case Replacement: 6 단계, 이미지 1/2 Panasonic Lumix DMC-F7 Back Case Replacement: 6 단계, 이미지 2/2

    • Use a spudger to pry open the case from all sides.

    번역하기

  8. Panasonic Lumix DMC-F7 Back Case Replacement: 7 단계, 이미지 1/2 Panasonic Lumix DMC-F7 Back Case Replacement: 7 단계, 이미지 2/2

    • Beware of the ribbon cable that is still attached when opening.

    • Use your fingers to carefully pry off the back casing from the camera assembly.

    번역하기

  9. Panasonic Lumix DMC-F7 Back Case Replacement: 8 단계, 이미지 1/1

    • Lay the camera on its front side. Use the spudger to open the film strip locking mechanism and remove strip.

    • Hold down on the camera's metal casing with one hand. Use your other hand to completely lift the back case off the rest of the camera, making sure the film strip separates.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 14명과 함께

Alex Penman

회원 가입일: 01/28/11

463 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 7-35, Regan Winter 2011 Cal Poly, Team 7-35, Regan Winter 2011 회원

CPSU-REGAN-W11S7G35

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 4

전체 시간: 895