주요 콘텐츠로 건너뛰기

소개

If your circuit board is broken, use this guide to help you replace it. You will need special tools to complete this guide. Please refer to the tools to make sure you have what you need.

부품

지정된 부품이 없습니다.

  1. Remove all screws (Phillips #000 head) from the sides and bottom of the camera. Remove all screws (Phillips #000 head) from the sides and bottom of the camera. Remove all screws (Phillips #000 head) from the sides and bottom of the camera.
    • Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

  2. Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.
    • Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.

  3. Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help. Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.
    • Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

결론

To reassemble your device, follow these instructions in reverse order.

Arianna Boushell

회원 가입일: 2017년 01월 24일

617 평판

안내서 5개 작성하였습니다

Cal Poly, Team 10-7, Banghart Winter 2017 Cal Poly, Team 10-7, Banghart Winter 2017 회원

CPSU-BANGHART-W17S10G7

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 202