주요 콘텐츠로 건너뛰기

소개

If your LCD screen is broken, follow this guide to replace it. You will need special tools in order to complete this replacement. Refer to the tools to be sure of what you need.

부품

지정된 부품이 없습니다.

  1. Remove all screws (Phillips #000 head) from the sides and bottom of the camera. Remove all screws (Phillips #000 head) from the sides and bottom of the camera. Remove all screws (Phillips #000 head) from the sides and bottom of the camera.
    • Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

  2. Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.
    • Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.

  3. Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help. Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.
    • Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

  4. Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up. Then, where the silver switch is located, it will slide directly out at the top.
    • Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up.

    • Then, where the silver switch is located, it will slide directly out at the top.

  5. Unscrew one screw (Phillips #000 head).
    • Unscrew one screw (Phillips #000 head).

  6. You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon. Once unlocked, you will be able to pull the ribbon out and remove the screen completely. Once unlocked, you will be able to pull the ribbon out and remove the screen completely.
    • You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon.

    • Once unlocked, you will be able to pull the ribbon out and remove the screen completely.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Arianna Boushell

회원 가입일: 2017년 01월 24일

617 평판

안내서 5개 작성하였습니다

Cal Poly, Team 10-7, Banghart Winter 2017 Cal Poly, Team 10-7, Banghart Winter 2017 회원

CPSU-BANGHART-W17S10G7

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 294