소개

This guide will show the user how to disassemble the camera to reach the Flash Top Assembly. Once the Flash Top Assembly is reached, the user can replace it.

부품

부품은 필요하지 않습니다.

  1. Locate the memory card and battery card latch on the bottom of the camera.
    • Locate the memory card and battery card latch on the bottom of the camera.

    • Slide the latch to the open position.

  2. Open the battery latch, and slide the battery release lever to the right.
    • Open the battery latch, and slide the battery release lever to the right.

  3. Remove the battery from the camera.
    • Remove the battery from the camera.

  4. Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.
    • Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.

    • Use this screwdriver for all screws in the device.

  5. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the 3.15 mm screw on the left side of the camera.
    • Remove the 3.15 mm screw on the left side of the camera.

  7. Remove the left side casing. Remove the left side casing.
    • Remove the left side casing.

  8. Remove the two 3.15 mm screws on the right side of the camera.
    • Remove the two 3.15 mm screws on the right side of the camera.

  9. Remove the bottom right panel.
    • Remove the bottom right panel.

  10. Gently remove the back casing. Start at the bottom and carefully pry towards the top to get this piece free.
    • Gently remove the back casing.

    • Start at the bottom and carefully pry towards the top to get this piece free.

  11. Carefully pry the Flash Top Assembly away from the top. Carefully pry the Flash Top Assembly away from the top.
    • Carefully pry the Flash Top Assembly away from the top.

  12. Replace the Flash Top Assembly with a new one. Replace the Flash Top Assembly with a new one.
    • Replace the Flash Top Assembly with a new one.

결론

To reassemble your device, follow these instructions in reverse order.

Caleb Fink

회원 가입일: 2010년 10월 11일

186 평판

안내서 2개 작성하였습니다

Cal Poly, Team 9-22, Regan Fall 2010 Cal Poly, Team 9-22, Regan Fall 2010 회원

CPSU-REGAN-F10S9G22

4 회원들

안내서 8개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 7

전체 시간: 3,531