기기를 수리하세요 커뮤니티 상점

Panasonic Lumix DMC-GX85 Main PCB Replacement

소개

The Main PCB is one of the most important parts of the Panasonic Lumix DMC-GX85; it cannot function properly without one. Replacing a faulty Main PCB is made easy here.

필요한 것

  1. Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: 1 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: 1 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: 1 단계, 이미지 3/3

    • Remove the plastic hot shoe cover by sliding it towards the rear of the camera.

    번역하기

  2. Panasonic Lumix DMC-GX85 Main PCB Replacement: 2 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 2 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 2 단계, 이미지 3/3

    • Using a spudger, gently lift the forward end of the shoe spring to disengage its locking mechanism.

    • While holding the forward end of the shoe spring up, push from its lifted end to remove the shoe spring.

    번역하기

  3. Panasonic Lumix DMC-GX85 Main PCB Replacement: 3 단계, 이미지 1/2 Panasonic Lumix DMC-GX85 Main PCB Replacement: 3 단계, 이미지 2/2

    • Remove the two 6.0mm silver Phillips #0 screws closest to the display screen.

    • Do not remove the two forward-most silver screws.

    번역하기

  4. Panasonic Lumix DMC-GX85 Main PCB Replacement: 4 단계, 이미지 1/2 Panasonic Lumix DMC-GX85 Main PCB Replacement: 4 단계, 이미지 2/2

    • Turn the camera so the side with the jack cover is facing you.

    • Near the camera's top end, remove the 4.0mm black Phillips #0 screw on the bottom in this orientation.

    • Open the jack cover and remove the 4.0mm black Phillips #0 screw inside.

    번역하기

  6. Panasonic Lumix DMC-GX85 Main PCB Replacement: 5 단계, 이미지 1/2 Panasonic Lumix DMC-GX85 Main PCB Replacement: 5 단계, 이미지 2/2

    • Flip the camera upside down so the bottom of the camera is facing you.

    • Remove the two center 2.5mm black Phillips #0 screws.

    • Remove the outer 4.5mm black Phillips #0 screw.

    번역하기

  7. Panasonic Lumix DMC-GX85 Main PCB Replacement: 6 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 6 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 6 단계, 이미지 3/3

    • Turn the camera so the display screen is facing you.

    • Rotate the top of the screen away from the camera body to access and remove the 4.5mm black Phillips #0 screw.

    • Remove the rear camera cover by gently pulling from the top side.

    • When removing the rear cover, pull apart slowly to prevent damaging the ribbon cable connecting the display screen and the Sub PCB.

    번역하기

  8. Panasonic Lumix DMC-GX85 Main PCB Replacement: 7 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 7 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 7 단계, 이미지 3/3

    • Turn the camera so the lens is facing down with the rear cover pulled back.

    • Disconnect the ribbon cable from the camera by pulling up on the black locking tab with an iFixit opening tool.

    • Pull the ribbon cable from the connector. The rear cover is now completely detached from the camera.

    • Do not bend the ribbon cable excessively and take care not to damage the ribbon cable.

    번역하기

  9. Panasonic Lumix DMC-GX85 Main PCB Replacement, Main PCB: 8 단계, 이미지 1/2 Panasonic Lumix DMC-GX85 Main PCB Replacement, Main PCB: 8 단계, 이미지 2/2

    • Remove the three 3.5mm silver Phillips #0 screws mounting the main PCB to the camera frame.

    번역하기

  10. Panasonic Lumix DMC-GX85 Main PCB Replacement: 9 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 9 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 9 단계, 이미지 3/3

    • Disconnect the eight ribbon cables from the main PCB by pulling up on the black locking tabs with an iFixit opening tool.

    • Pull the ribbon cables from the connectors.

    • Do not bend the ribbon cable excessively and take care not to damage the ribbon cable.

    번역하기

  11. Panasonic Lumix DMC-GX85 Main PCB Replacement: 10 단계, 이미지 1/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 10 단계, 이미지 2/3 Panasonic Lumix DMC-GX85 Main PCB Replacement: 10 단계, 이미지 3/3

    • Gently lift the motherboard away from the camera body.

    • When removing the main PCB, take care not to lose the battery earth plate.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Hae Bom

회원 가입일: 09/17/19

560 평판

안내서 3개 작성하였습니다

배지: 10

배지 +7개 더

팀

Embry-Riddle Aeronautical University, Team S22-G2, Branham Fall 2019 Embry-Riddle Aeronautical University, Team S22-G2, Branham Fall 2019 회원

ERAU-BRANHAM-F19S22G2

4 회원들

안내서 7개 작성하였습니다

댓글 2개

Good day. How do I get the board both of the, the one on the right and one on d left

Tobas - 답글

Where i can find this replacement ? DMC-GX85 Main PCB Replacement

vissente tapia cuevas - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 13

30일 전: 85

전체 시간: 2,658