주요 콘텐츠로 건너뛰기

소개

Is your camera not turning on? A quick battery replacement may solve your problem.

부품

지정된 부품이 없습니다.

  1. Turn the camera off and identify the battery door located on the bottom of the camera. Turn the camera off and identify the battery door located on the bottom of the camera.
    • Turn the camera off and identify the battery door located on the bottom of the camera.

  2. Slide the "open" latch to the left: the battery door should spring open. If your battery door doesn't open you may have to pry it open using a plastic opening tool or a standard spudger.
    • Slide the "open" latch to the left: the battery door should spring open.

    • If your battery door doesn't open you may have to pry it open using a plastic opening tool or a standard spudger.

  3. To release the battery, slide the white release lever next to the SD card slot.
    • To release the battery, slide the white release lever next to the SD card slot.

    • If you find the battery release lever to be jammed you can push it using a plastic opening tool or standard spudger.

  4. The battery should now be released; you may now remove the battery from the camera body.
    • The battery should now be released; you may now remove the battery from the camera body.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Cameron Voos

회원 가입일: 2017년 02월 01일

26 평판

안내서 1개 작성함

Baylor, Team 8-5, Whitney Spring 2017 Baylor, Team 8-5, Whitney Spring 2017 회원

BU-WHITNEY-S17S8G5

3 회원들

안내서 4개 작성하였습니다

댓글 한 개

Repair guide is very clear and well-done

BayleeVersteeg - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 223