주요 콘텐츠로 건너뛰기

소개

The propellers are one of the most important elements of the drone when it comes to flight. Without proper placement, the drone will not be able to fly properly. This guide will teach you how and where to place the propellers.

  1. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws.
    • Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws.

  2. While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller. While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller.
    • While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기

    Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기
  4. While gently pushing down on the arm of which the propeller is attached, pull the propeller up off the motor.
    • While gently pushing down on the arm of which the propeller is attached, pull the propeller up off the motor.

  5. When putting the propellers back on, the red propellers go up front and the black ones go on the back. The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle. The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle.
    • When putting the propellers back on, the red propellers go up front and the black ones go on the back.

    • The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Nazar Savchuk

회원 가입일: 2017년 01월 25일

264 평판

안내서 2개 작성하였습니다

UW Tacoma, Team 1-3, Rose Winter 2017 UW Tacoma, Team 1-3, Rose Winter 2017 회원

UWT-ROSE-W17S1G3

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 43

전체 시간: 1,146