기기를 수리하세요 커뮤니티 상점

Parrot FLYPAD Joystick Replacement

소개

This guide will walk you through steps to replace your joystick.

필요한 것

  1. Parrot FLYPAD Joystick Replacement, Joystick: 1 단계, 이미지 1/1
    이 단계에 사용된 도구:
    Magnetic Project Mat
    $19.95
    구매

    • Total of 6 Screws are located in the back of the controller.

    • Four 0.9mm T6 screws

    • Two 0.1mm T6 screws

    • Flip the Flypad over.

    • Remove the six screws using a T6 screwdriver.

    • Use a Magnetic Mat to prevent loss of screws. Set aside.

    편집

  2. Parrot FLYPAD Joystick Replacement: 2 단계, 이미지 1/1

    • Flip the Flypad over again and separate the front and back. Be sure to remove the foam adhesive that connects the front plate to the motherboard.

    • Be aware that the Buttons (L1,R1) may fall out. Remember to put them back in place during reassembly.

    • Use Ph0 tool to remove the screws holding the motherboard in place.

    • Gently remove the motherboard from the front plate.

    편집

  4. Parrot FLYPAD Joystick Replacement: 3 단계, 이미지 1/2 Parrot FLYPAD Joystick Replacement: 3 단계, 이미지 2/2

    • Pop the joysticks out by pulling gently.

    편집

  5. Parrot FLYPAD Joystick Replacement: 4 단계, 이미지 1/1

    • Unscrew and replace joystick caps for a more comfortable grip.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

HUY NGUYEN

회원 가입일: 04/10/17

376 평판

안내서 3개 작성하였습니다

배지: 6

배지 +3개 더

팀

UW Tacoma, Team S3-G5, Liner Spring 2017 UW Tacoma, Team S3-G5, Liner Spring 2017 회원

UWT-LINER-S17S3G5

5 회원들

안내서 3개 작성하였습니다

댓글 2개

Do you know where I can find replacement joystick caps like the one shown in Step 4, please?

cbeilstein - 답글

Same question as above regarding joystick caps please

Alex - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 11

전체 시간: 695