물건을 수리하세요 커뮤니티 상점

Pebble Time Circuit Board Replacement

소개

Replacement guide for the circuit board of the Pebble Time.

필요한 것

  1. Pebble Time Circuit Board Replacement, Screen Cover: 1 단계, 이미지 1개 중 1개

    • Lay the watch flat on your workstation.

    번역하기

  2. Pebble Time Circuit Board Replacement: 2 단계, 이미지 2개 중 1개 Pebble Time Circuit Board Replacement: 2 단계, 이미지 2개 중 2개

    • Use the metal spudger to carefully pull apart the screen cover from the case.

    • Replace the metal spudger with a plastic opening tool to hold the cover open.

    번역하기

  3. Pebble Time Circuit Board Replacement: 3 단계, 이미지 1개 중 1개

    • Use the metal spudger tool to carefully loosen the rest of the cover.

    번역하기

  4. Pebble Time Circuit Board Replacement: 4 단계, 이미지 1개 중 1개

    • Carefully, pull apart the cover with the plastic opening tool.

    번역하기

  6. Pebble Time Circuit Board Replacement, Screen: 5 단계, 이미지 1개 중 1개

    • Insert metal spudger into the side of the screen shown in the picture.

    번역하기

  7. Pebble Time Circuit Board Replacement: 6 단계, 이미지 1개 중 1개

    • Use the metal spudger to pry the screen up.

    번역하기

  8. Pebble Time Circuit Board Replacement: 7 단계, 이미지 3개 중 1개 Pebble Time Circuit Board Replacement: 7 단계, 이미지 3개 중 2개 Pebble Time Circuit Board Replacement: 7 단계, 이미지 3개 중 3개

    • Once screen is lifted, insert plastic opening tool between the screen connector and circuit board.

    • Disconnect the screen from the circuit board.

    번역하기

  9. Pebble Time Circuit Board Replacement, Circuit Board: 8 단계, 이미지 1개 중 1개

    • Keep the watch flat on your workstation.

    번역하기

  10. Pebble Time Circuit Board Replacement: 9 단계, 이미지 1개 중 1개

    • Locate the three screws on the circuit board.

    • Remove using the J000 Philips head screwdriver.

    번역하기

  11. Pebble Time Circuit Board Replacement: 10 단계, 이미지 3개 중 1개 Pebble Time Circuit Board Replacement: 10 단계, 이미지 3개 중 2개 Pebble Time Circuit Board Replacement: 10 단계, 이미지 3개 중 3개

    • Carefully disconnect the connector wire on the bottom left edge of the circuit board using a plastic opener tool.

    • Move apart the connector to expose the fourth screw.

    번역하기

  12. Pebble Time Circuit Board Replacement: 11 단계, 이미지 1개 중 1개

    • Remove the final screw from the circuit board with a J000 Philips head screwdriver.

    번역하기

  13. Pebble Time Circuit Board Replacement: 12 단계, 이미지 2개 중 1개 Pebble Time Circuit Board Replacement: 12 단계, 이미지 2개 중 2개

    • Turn the watch to the side and use the plastic opening tool to lift up the circuit board.

    • Remove the circuit board from the case.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

2다른 기여자 명과 함께

Nicolas Hempe

회원 가입일: 02/15/17

1,468 평판

안내서 5개를 작성함

배지: 14

배지 +11개 더

팀

USF Tampa, Team 1-3, Sullivan Spring 2017 USF Tampa, Team 1-3, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S1G3

4 회원들

안내서 10개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 6

전체 시간: 1,010