기기를 수리하세요 커뮤니티 상점

Pebble Time Circuit Board Replacement

소개

Replacement guide for the circuit board of the Pebble Time.

필요한 것

  1. Pebble Time Circuit Board Replacement, Screen Cover: 1 단계, 이미지 1/1

    • Lay the watch flat on your workstation.

    편집

  2. Pebble Time Circuit Board Replacement: 2 단계, 이미지 1/2 Pebble Time Circuit Board Replacement: 2 단계, 이미지 2/2

    • Use the metal spudger to carefully pull apart the screen cover from the case.

    • Replace the metal spudger with a plastic opening tool to hold the cover open.

    편집

  3. Pebble Time Circuit Board Replacement: 3 단계, 이미지 1/1

    • Use the metal spudger tool to carefully loosen the rest of the cover.

    편집

  4. Pebble Time Circuit Board Replacement: 4 단계, 이미지 1/1

    • Carefully, pull apart the cover with the plastic opening tool.

    편집

  6. Pebble Time Circuit Board Replacement, Screen: 5 단계, 이미지 1/1

    • Insert metal spudger into the side of the screen shown in the picture.

    편집

  7. Pebble Time Circuit Board Replacement: 6 단계, 이미지 1/1

    • Use the metal spudger to pry the screen up.

    편집

  8. Pebble Time Circuit Board Replacement: 7 단계, 이미지 1/3 Pebble Time Circuit Board Replacement: 7 단계, 이미지 2/3 Pebble Time Circuit Board Replacement: 7 단계, 이미지 3/3

    • Once screen is lifted, insert plastic opening tool between the screen connector and circuit board.

    • Disconnect the screen from the circuit board.

    편집

  9. Pebble Time Circuit Board Replacement, Circuit Board: 8 단계, 이미지 1/1

    • Keep the watch flat on your workstation.

    편집

  10. Pebble Time Circuit Board Replacement: 9 단계, 이미지 1/1

    • Locate the three screws on the circuit board.

    • Remove using the J000 Philips head screwdriver.

    편집

  11. Pebble Time Circuit Board Replacement: 10 단계, 이미지 1/3 Pebble Time Circuit Board Replacement: 10 단계, 이미지 2/3 Pebble Time Circuit Board Replacement: 10 단계, 이미지 3/3

    • Carefully disconnect the connector wire on the bottom left edge of the circuit board using a plastic opener tool.

    • Move apart the connector to expose the fourth screw.

    편집

  12. Pebble Time Circuit Board Replacement: 11 단계, 이미지 1/1

    • Remove the final screw from the circuit board with a J000 Philips head screwdriver.

    편집

  13. Pebble Time Circuit Board Replacement: 12 단계, 이미지 1/2 Pebble Time Circuit Board Replacement: 12 단계, 이미지 2/2

    • Turn the watch to the side and use the plastic opening tool to lift up the circuit board.

    • Remove the circuit board from the case.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nicolas Hempe

회원 가입일: 02/15/17

1,444 평판

안내서 5개 작성하였습니다

배지: 13

배지 +10개 더

팀

USF Tampa, Team 1-3, Sullivan Spring 2017 USF Tampa, Team 1-3, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S1G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 7

전체 시간: 828