기기를 수리하세요 커뮤니티 상점

Pebble Time Round Motherboard Replacement

필요한 것

  1. Pebble Time Round Motherboard Replacement, Glass Screen Protector: 1 단계, 이미지 1/1

    • Wedge an opening tool between the case of the watch, and the glass screen bezel.

    • Pry the screen bezel away from the device.

    • If you have a difficult time getting the front bezel to separate from the case, try warming the watch up with a hair dryer.

    • There are three very tiny springs that are compressed between holes in the case and the front bezel. They can pop out once the bezel is removed, so don't lose them! Remove them and put them somewhere safe once the bezel is removed.

    편집

  2. Pebble Time Round Motherboard Replacement: 2 단계, 이미지 1/1

    • Pull the screen protector away from the device, breaking glue sealant.

    • Separate the screen protector from the screen.

    • To re-seal the glass protector's glue, simply heat the glue.

    편집

  3. Pebble Time Round Motherboard Replacement, E-Paper Display: 3 단계, 이미지 1/1

    • Insert a prying tool between the bezel ring and the e-paper screen. Move the tool around the circumference of the ring until it separates from the e-paper screen.

    편집

  5. Pebble Time Round Motherboard Replacement: 4 단계, 이미지 1/2 Pebble Time Round Motherboard Replacement: 4 단계, 이미지 2/2

    • Slightly lift the screen and you will see a yellow cable that connects to the motherboard.

    • Use a pair of tweezers to carefully pull the cable up from the motherboard to disconnect it.

    편집

  6. Pebble Time Round Motherboard Replacement: 5 단계, 이미지 1/1

    • Use tweezers to disconnect the small yellow wire from the top of the e-paper screen.

    • The wire is connected with a bit of glue, so it will come off with ease.

    편집

  7. Pebble Time Round Motherboard Replacement, Motherboard: 6 단계, 이미지 1/1

    • Remove the three screws that hold the motherboard down using a Phillips #000 screwdriver.

    편집

  8. Pebble Time Round Motherboard Replacement: 7 단계, 이미지 1/1

    • Remove the cable connecting the motherboard vibration motor, microphone, and light sensor.

    • Remove the motherboard from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Christopher Ferreira

회원 가입일: 11/02/21

85 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

UMass Dartmouth, Team 4-5, Gulbrandsen Fall 2021 UMass Dartmouth, Team 4-5, Gulbrandsen Fall 2021 회원

UMASSD-GULBRANDSEN-F21S4G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 175