주요 콘텐츠로 건너뛰기

소개

Use this guide to open up your speaker and remove and replace different components under the front panel.

부품

지정된 부품이 없습니다.

  1. Before continuing, be sure your device is powered off.
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Peel back the rubber feet from either side of the base.
    • Peel back the rubber feet from either side of the base.

  3. Remove four 9mm Phillips #0 head screws from the bottom of the speaker.
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. Separate the base of the speaker from the upper housing.
    • Separate the base of the speaker from the upper housing.

  5. Remove four 9mm Phillips #0 head screws from the inside of the speaker case.
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard.
    • Remove all cable connectors from the speaker motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

David Lennon

회원 가입일: 2015년 04월 14일

9,518 평판

안내서 10개 작성하였습니다

Cal Poly, Team 4-5, Maness Spring 2015 Cal Poly, Team 4-5, Maness Spring 2015 회원

CPSU-MANESS-S15S4G5

4 회원들

안내서 28개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 347