기기를 수리하세요 커뮤니티 상점

Pioneer Elite PRO-RO6U Optical Drive Replacement

소개

Water damage or a faulty electrical component on the optical drive may prevent the Pioneer Elite Pro-R06U from properly displaying an image on the television. Replacement may be necessary to get the receiver back in working order.

필요한 것

  1. Pioneer Elite PRO-RO6U Optical Drive Replacement, Optical Drive: 1 단계, 이미지 1/1

    • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

    편집

  2. Pioneer Elite PRO-RO6U Optical Drive Replacement: 2 단계, 이미지 1/1

    • Remove the two 6.5 mm Phillips screws on the back of the device casing.

    편집

  3. Pioneer Elite PRO-RO6U Optical Drive Replacement: 3 단계, 이미지 1/1

    • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

    편집

  4. Pioneer Elite PRO-RO6U Optical Drive Replacement: 4 단계, 이미지 1/1

    • Remove the optical drive cooling fan by gripping the ribbon connector at M11 and gently remove by pulling away from the slot.

    편집

  6. Pioneer Elite PRO-RO6U Optical Drive Replacement: 5 단계, 이미지 1/1

    • Flip the latch on the ribbon connector upward to allow for cable removal.

    • Grip the ribbon cable and remove by gently pulling away from the unlatched connector.

    편집

  7. Pioneer Elite PRO-RO6U Optical Drive Replacement: 6 단계, 이미지 1/1

    • Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.

    편집

  8. Pioneer Elite PRO-RO6U Optical Drive Replacement: 7 단계, 이미지 1/1

    • Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.

    편집

  9. Pioneer Elite PRO-RO6U Optical Drive Replacement: 8 단계, 이미지 1/1

    • Unplug ribbon cables D4 and D5. To unplug D4, flip the gate up and pull the ribbon away.

    편집

  10. Pioneer Elite PRO-RO6U Optical Drive Replacement: 9 단계, 이미지 1/1

    • Remove four 1/4th inch Phillips screws on the back of the casing.

    • Unscrew and remove the nut from the threaded connector.

    편집

  11. Pioneer Elite PRO-RO6U Optical Drive Replacement: 10 단계, 이미지 1/1

    • The optical drive is still connected by a cable on its bottom side, lift the drive upwards only slightly when first removing from the casing.

    • Pull the optical drive toward the interior of the device and then lift upwards, then pull to remove the cord on the bottom left corner before removing the drive completely.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Cody Carter

회원 가입일: 01/30/18

1,049 평판

안내서 6개 작성하였습니다

배지: 5

배지 +2개 더

팀

Baylor, Team S1-G5, Johnson Spring 2018 Baylor, Team S1-G5, Johnson Spring 2018 회원

BU-JOHNSON-S18S1G5

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 286