기기를 수리하세요 커뮤니티 상점

Pioneer R1 Battery Replacement

소개

This guide will demonstrate how to access and replace the R1's battery.

필요한 것

  1. Pioneer R1 Battery Replacement, Battery: 1 단계, 이미지 1/1

    • Insert your plastic spudger into the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

    번역하기

  2. Pioneer R1 Battery Replacement: 2 단계, 이미지 1/1

    • Lay the R1 flat like an open book.

    • This will prevent the speakers from becoming disconnected from the motherboard.

    번역하기

  4. Pioneer R1 Battery Replacement: 3 단계, 이미지 1/1

    • Slide a strong thin object, like a thin spudger, between the battery and the display.

    • Slide the object along the length of the battery to remove it from the display.

    • The adhesive holding the battery in place is strong and the battery is quite soft. Take care not to break open the battery.

    • Disengage the battery cables from the motherboard.

    번역하기

  5. Pioneer R1 Battery Replacement: 4 단계, 이미지 1/1

    • Solder the black cable to the nodule labeled BAT+.

    • Solder the red cable to the nodule labeled BAT-.

    • Do not allow the solder from one nodule to touch the other, this may cause the battery to explode.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Christopher Rosario

회원 가입일: 02/17/15

411 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

San Diego State, Team 1-1, Sheppard Winter 2015 San Diego State, Team 1-1, Sheppard Winter 2015 회원

SDSU-SHEPPARD-W15S1G1

3 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 775