주요 콘텐츠로 건너뛰기

소개

Sometimes, the O-ring seals in the Etha's bolt can get worn out and need to be replaced. Fortunately, Planet Eclipse designed this part of the marker to be taken apart and put back together with ease.

부품

  1. Using the 1/4" hex key, turn the bolt counterclockwise and remove. Using the 1/4" hex key, turn the bolt counterclockwise and remove. Using the 1/4" hex key, turn the bolt counterclockwise and remove.
    • Using the 1/4" hex key, turn the bolt counterclockwise and remove.

  2. Slide the bolt tip and spring off of the main assembly. Keep a towel handy, you may get some grease on your hands.
    • Slide the bolt tip and spring off of the main assembly.

    • Keep a towel handy, you may get some grease on your hands.

  3. Unscrew the casing from the rest of the bolt. Again, you may get some grease on your hands during this step. Again, you may get some grease on your hands during this step.
    • Unscrew the casing from the rest of the bolt.

    • Again, you may get some grease on your hands during this step.

  4. Grab the flat surface shown. Unscrew this portion counter clockwise to remove it. If you're having trouble unscrewing the part, try using a small wrench.
    • Grab the flat surface shown.

    • Unscrew this portion counter clockwise to remove it.

    • If you're having trouble unscrewing the part, try using a small wrench.

  5. Grab the threaded cover and slide it away from the spring. The bolt should now be in three pieces.
    • Grab the threaded cover and slide it away from the spring.

    • The bolt should now be in three pieces.

    • The threaded cover is the same part that you unscrewed in the last step.

  6. Replace and lubricate the 9 marked O-rings. O-ring removal will be explained in the next step. O-ring removal will be explained in the next step.
    • Replace and lubricate the 9 marked O-rings.

    • O-ring removal will be explained in the next step.

  7. Grab the O-ring on the sides. Pinch the O-ring upwards to create a gap between the metal and the ring. Use a small object to slip into the loop and pull the O-ring off gently.
    • Grab the O-ring on the sides.

    • Pinch the O-ring upwards to create a gap between the metal and the ring.

    • Use a small object to slip into the loop and pull the O-ring off gently.

    • We recommend using a small Allen Key for this.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

nicholasj6

회원 가입일: 2014년 10월 14일

261 평판

안내서 2개 작성하였습니다

Cal Poly, Team 10-42, Amido Fall 2014 Cal Poly, Team 10-42, Amido Fall 2014 회원

CPSU-AMIDO-F14S10G42

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 4

전체 시간: 1,680