소개
This guide will show how to replace the solenoid in the Geo3 if it has become nonfunctional.
필요한 것
-
-
-
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
-
-
-
Using the Phillips #0 screwdriver, remove the 2 screws in the solenoid.
-
Remove the solenoid.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.