소개

Use this guide to replace your base unit's motherboard.

부품

부품은 필요하지 않습니다.

  1. Flip over the base unit to reveal the bottom. Flip over the base unit to reveal the bottom.
    • Flip over the base unit to reveal the bottom.

  2. Using a #0 screwdriver, remove the two 2.50mm screws. Using a #0 screwdriver, remove the two 2.50mm screws.
    • Using a #0 screwdriver, remove the two 2.50mm screws.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Separate, but do not remove, the silver upper piece from the dark lower piece. Carefully disconnect the wires from the motherboard. Remove the silver top of the base.
    • Separate, but do not remove, the silver upper piece from the dark lower piece.

    • Carefully disconnect the wires from the motherboard.

    • Remove the silver top of the base.

  5. Remove the motherboard from the base Remove the motherboard from the base Remove the motherboard from the base
    • Remove the motherboard from the base

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Bryan Clark

회원 가입일: 2012년 04월 12일

44 평판

안내서 1개 작성함

Cal Poly, Team 17-29, Amido Spring 2012 Cal Poly, Team 17-29, Amido Spring 2012 회원

CPSU-AMIDO-S12S17G29

4 회원들

안내서 7개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 693