PlayStation 2 Slimline IR Sensor Replacement

소개

This guide will show you how to locate and replace the Infrared Sensor in the Playstation 2 Slimline. The IR sensor reads wireless signals so PS2 controllers and remotes function as if they were plugged into the unit.

필요한 것

1 단계 Outer Shell

PlayStation 2 Slimline IR Sensor Replacement, Outer Shell: 1 단계, 이미지 1개 중 1개

Disconnect all cables from the console and flip the unit over to reveal its base.

번역하기

2 단계

PlayStation 2 Slimline IR Sensor Replacement: 2 단계, 이미지 3개 중 3개

Locate the 6 feet on the base of the unit. Pry them off using a spudger to reveal the screws.
Note: One of the feet is located under the sticker shown in the photo. Removing this sticker will void any warranty with Sony.

번역하기

3 단계

PlayStation 2 Slimline IR Sensor Replacement: 3 단계, 이미지 3개 중 3개

Remove all six 4.0 mm screws from the base of the unit using a #1 Phillips screwdriver.

번역하기

4 단계

PlayStation 2 Slimline IR Sensor Replacement: 4 단계, 이미지 3개 중 3개

Starting at the corner at which the power and Ethernet ports are located, pry open the outer shell using a spudger and continue around the entire unit.
Note: You may use your hands for additional force to separate the two pieces of the outer shell.

번역하기

5 단계 IR Sensor

PlayStation 2 Slimline IR Sensor Replacement, IR Sensor: 5 단계, 이미지 1개 중 1개

Locate the IR sensor at the front, right corner of the unit.

번역하기

6 단계

Gently detach the ribbon cable connecting the IR sensor to the motherboard.
Caution: Always remove ribbon cables by the plastic handles located on either end. Gripping a ribbon cable anywhere but the provided handles can damage the cable and render the component useless.

번역하기