기기를 수리하세요 커뮤니티 상점

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

소개

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

필요한 것

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: 1 단계, 이미지 1/1

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    번역하기

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 2 단계, 이미지 1/1

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    번역하기

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 3 단계, 이미지 1/1

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    번역하기

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 4 단계, 이미지 1/2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 4 단계, 이미지 2/2

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    번역하기

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 5 단계, 이미지 1/1

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    번역하기

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 6 단계, 이미지 1/2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 6 단계, 이미지 2/2

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    번역하기

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: 7 단계, 이미지 1/1

    • Remove the Phillips screw from the power supply.

    번역하기

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: 8 단계, 이미지 1/1

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    번역하기

    • Lift the power supply straight up and out of the PS2.

    번역하기
결론

To reassemble your device, follow the above steps in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

de en

100%

MrJulian

shingle

이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

MrJulian

회원 가입일: 10/22/20

1,543 평판

안내서 7개 작성하였습니다

배지: 18

배지 +15개 더

댓글 한 개

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 89

전체 시간: 663