주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

PlayStation 3 Motherboard Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. PlayStation 3 Motherboard Assembly Replacement, Motherboard Assembly: 1 단계, 이미지 1/1
    • Pull the control board ribbon cable straight up and out of its socket on the motherboard.

  2. PlayStation 3 Motherboard Assembly Replacement: 2 단계, 이미지 1/2 PlayStation 3 Motherboard Assembly Replacement: 2 단계, 이미지 2/2
    • Remove the two 12 mm Phillips screws securing the control board to the lower case.

    • Remove the control board and its attached cable from the PS3.

  3. PlayStation 3 Motherboard Assembly Replacement: 3 단계, 이미지 1/1
    • Remove the following eight screws securing the motherboard assembly to the lower case:

    • Seven 12 mm Phillips screws (ph2)

    • One 30 mm Phillips screw

  4. PlayStation 3 Motherboard Assembly Replacement: 4 단계, 이미지 1/1
    • Remove the control board bracket.

  5. PlayStation 3 Motherboard Assembly Replacement: 5 단계, 이미지 1/2 PlayStation 3 Motherboard Assembly Replacement: 5 단계, 이미지 2/2
    • Use the flat end of a spudger to pry the hard drive bay cover away from the lower case.

    • Remove the hard drive bay cover.

  6. PlayStation 3 Motherboard Assembly Replacement: 6 단계, 이미지 1/1
    • Lift the motherboard assembly out of the lower case.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

694,627 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,197