소개

If you want to replace the fan or clean the fan system - video tutorial:


Please SUBSCRIBE to my channel ツ

동영상 개요

  1. Disconnect the fan cable and remove the nine screws from the bottom side.
    • Disconnect the fan cable and remove the nine screws from the bottom side.

    댓글 쓰기

  2. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield.
    • Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove the four Phillips screws and lift the top shield.

    댓글 쓰기

  4. 댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

ZFix

회원 가입일: 2013년 12월 09일

160,284 평판

안내서 304개 작성하였습니다

Master Techs Master Techs 회원

Community

279 회원들

안내서 758개 작성하였습니다

Awesome guide. Thank you so much. I did it, but now I just wonder what that white stuff was when I removed the motherboard. I think it's that thermal stuff people have been talking about and I suppose I have to replace that. I also hope that it's the fan that is what's causing my PS3 to say that it's overheating and shut off. I'm so glad you guys posted this. Great job. I rather do it myself than pay Sony an arm and a leg. Cheers!

chetacheez - 답글

This is CPU / GPU thermal paste / compound. I recommend you Arctic MX-2, MX-4. It is very good and not expensive.

ZFix -

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 19

지난 30일: 96

전체 시간: 7,717