기기를 수리하세요 커뮤니티 상점

PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

소개

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

필요한 것

동영상 개요

  1. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 1 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 1 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 1 단계, 이미지 3/3

    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    편집

  2. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 2 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 2 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 2 단계, 이미지 3/3

    • To remove the power supply, first disconnect the two cables, then the 2 Phillips screws. Then lift it upwards.

    편집

  3. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 3 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 3 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 3 단계, 이미지 3/3

    • Separate cables, unscrew the screw and remove the Blu Ray drive.

    • Depending on the model of your PS3 Slim, the number of cables to be removed may vary between 2 and 4. If your model has more than one ribbon cable, remove the drive very carefully, as a fourth ribbon cable may be hidden underneath.

    편집

  5. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 4 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 4 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 4 단계, 이미지 3/3

    • Disassemble the upper metal shield by first unscrewing the 3 Phillips screws.

    • On the 2-cables model, you'll need to unscrew an additional 2 small Phillips screws, located on the underside of the drive. While you're at it, unscrew the 2 other Phillips screws at the bottom of the shield. (Their presence does not prevent removal of the upper metal shield, but removing them will be useful later).

    편집

  6. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 5 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 5 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 5 단계, 이미지 3/3

    • For the 2-cables model, remove the two very small phillips screws in each lower corner referenced by the red circles.

    • For the 4-cables model, remove the small Phillips screw in the bottom left corner referenced by the red circle.

    편집

  7. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 6 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 6 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 6 단계, 이미지 3/3

    • Carefully remove the plastic shell, paying attention to the cable that runs through it for the 4-cables model.

    편집

  8. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 7 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 7 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 7 단계, 이미지 3/3

    • Remove the 4 Phillips screws at each corner of the laser mechanism.

    • Then remove the mechanism.

    편집

  9. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 8 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 8 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 8 단계, 이미지 3/3

    • If necessary, transfer parts and screws from the old mechanism to the new one.

    편집

  10. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 9 단계, 이미지 1/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 9 단계, 이미지 2/3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 9 단계, 이미지 3/3

    • You can test the console before full assembling.

    • To do this, reassemble the blu-ray drive, reconnect its cables, and reconnect the power supply.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 16명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 8명과 함께

ZFix

회원 가입일: 12/09/13

191,182 평판

안내서 330개 작성하였습니다

배지: 35

배지 +32개 더

팀

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,521개 작성하였습니다

댓글 한 개

Do you know what the part number is for the deck? I don’t want to buy the wrong one. Thanks.

Edmond Charrette - 답글

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 46

30일 전: 266

전체 시간: 28,700