기기를 수리하세요 커뮤니티 상점

PlayStation 3 Slim Laser lens Replacement

작성자 ZFix (또 다른 기여자 3명)
  • 댓글 13
  • 즐겨찾기 18
  • 완료: 18

난이도

보통

단계

6

소요 시간

45 분

섹션

1

플래그

1

Member-Contributed Guide

회원-기여 안내서

해당 안내서는 저희 커뮤니티의 멋진 회원께서 작성하였습니다. iFixit 직원이 관리하지 않습니다.

소개

Video tutorial - how to replace Laser Lens only:

동영상 개요

  1. If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive. If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.

    • If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.

    편집

  2. Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.

    • Be sure you are prying up on the movable retaining flap, not the socket itself.

    편집

  4. Pull the Blu-ray ribbon cable straight up and out of its socket.

    • Pull the Blu-ray ribbon cable straight up and out of its socket.

    편집

  5. Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.

    • Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.

    편집

  6. Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.

    • Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.

    편집

  7. Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing. Remove the Blu-ray drive from the PS3.

    • Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.

    • Remove the Blu-ray drive from the PS3.

    • After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.

    • If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 18명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

ZFix

회원 가입일: 2013년 12월 09일

184,202 평판

안내서 330개 작성하였습니다

배지: 35

배지 +32개 더

팀

Master Techs Master Techs 회원

Community

307 회원들

안내서 1,104개 작성하였습니다

댓글 5개

Donde puedo comprar refacciones y partes para PS3 Slim?

David - 답글

yo vendo amigo = ivaramso@gmail.com para ventas

Ivan Ramirez -

How can this be easy, but the Blu-Ray drive be considered Moderate? You need to complete the Blu-Ray drive removal prior to replacing the laser lens, which means this is at best a Moderate task.

Ben Kevan - 답글

This is not lens replacement, this is drive replacement. Is there a separate guide for lens replacement?

cmchallam - 답글

Shows how to do the laser assembly in the video but not how to reinstall it in the drive. Lazy guide. Just buy a whole new drive if you are following this guide.

Beninja - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 24

30일 전: 117

전체 시간: 29,838