주요 콘텐츠로 건너뛰기

PlayStation 3 Slim Top Cover Replacement

필요한 것

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: 1 단계, 이미지 1/1
    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

  2. PlayStation 3 Slim Top Cover Replacement: 2 단계, 이미지 1/2 PlayStation 3 Slim Top Cover Replacement: 2 단계, 이미지 2/2
    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

  3. PlayStation 3 Slim Top Cover Replacement: 3 단계, 이미지 1/1
    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

  4. PlayStation 3 Slim Top Cover Replacement: 4 단계, 이미지 1/1
    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

  5. PlayStation 3 Slim Top Cover Replacement: 5 단계, 이미지 1/2 PlayStation 3 Slim Top Cover Replacement: 5 단계, 이미지 2/2
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

결론

To reassemble your device, follow these instructions in reverse order.

다른 92명이 해당 안내서를 완성하였습니다.

Andrew Bookholt

586,109 평판

안내서 619개 작성하였습니다

댓글 2개

No good mine a Sony.

james register - 답글

Thank you this helped me so much!!!!

Megan Davis - 답글

댓글 쓰기

조회 통계:

24 시간 전: 12

7일 전: 90

30일 전: 312

전체 시간: 73,206