주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

If your PlayStation is no longer registering controller input or recognizing memory cards, it may be time to replace the controller ports on the console. This guide will take you through the process of replacing this component, which includes the controller ports and the memory card slots in one assembly.

Note: This repair is demonstrated on a SCPH-1001 model. The process may differ slightly if you have a later model.

부품

지정된 부품이 없습니다.

  1. Before you begin, make sure the console is turned off and unplugged.
    • Before you begin, make sure the console is turned off and unplugged.

    • Turn the console upside down and remove the five 15.8 mm-long Phillips #1 screws.

  2. While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it. While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it.
    • While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Remove five Phillips #1 screws securing the metal shield to the controller ports:
    • Remove five Phillips #1 screws securing the metal shield to the controller ports:

    • Two 14 mm screws

    • Three 8 mm screws

  5. Lift the metal shield straight up to remove it. Lift the metal shield straight up to remove it.
    • Lift the metal shield straight up to remove it.

  6. Pull the controller port's ribbon cable straight up and out of its socket on the motherboard to disconnect it. Pull the controller port's ribbon cable straight up and out of its socket on the motherboard to disconnect it.
    • Pull the controller port's ribbon cable straight up and out of its socket on the motherboard to disconnect it.

  7. Lift the controller ports straight up and out of the bottom case. Lift the controller ports straight up and out of the bottom case.
    • Lift the controller ports straight up and out of the bottom case.

결론

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

다른 8명이 해당 안내서를 완성하였습니다.

Craig Lloyd

회원 가입일: 2016년 02월 10일

11,749 평판

안내서 63개 작성하였습니다

iFixit iFixit 회원

Community

128 회원들

안내서 12,985개 작성하였습니다

I try replacing the controller and still wouldn't play memory cards.

redevil19 - 답글

I changed the controller port but the psx still doesn't recognize any controller. Both controller port and ribbon cable work perfect in other console. I wonder which components on the mother board are related with the controller ports so I can check them with a tester.

Daniel Prieto - 답글

I replaced the PS605 fuse and now the controllers work again! Thanks to this video https://www.youtube.com/watch?v=HdULot5F...

Daniel Prieto -

I'm having a weird issue, it will read in second do

Port but not the first. Changed controller port and still having the same issue

michael wise - 답글

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 25

30일 전: 112

전체 시간: 21,079