소개
This will repair your SCPH-5501 without buying a new KSM-440-ADM laser off of ebay.
필요한 것
-
-
Remove the parallel port cover on the back of the PlayStation.
-
Flip over the PlayStation and remove the six screws from the bottom.
-
Turn the PlayStation upright. Remove the cover by lifting it up.
-
-
-
-
Disconnect the second cable by pulling up on the plastic connector at the end.
-
Remove the 2 screws and take the black bottom piece of the old Optical drive.
-
Take the new Optical drive from either a SCPH-7501 or an SCPH-9001.
-
Gently pull on the orange ribbon, but not too much or you could rip it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.