주요 콘텐츠로 건너뛰기

PlayStation Move Case Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. PlayStation Move Case Replacement, Case: 1 단계, 이미지 1/2 PlayStation Move Case Replacement, Case: 1 단계, 이미지 2/2
    • Turn the controller over and unscrew the four 10mm screws with a PH #00 screwdriver.

  2. PlayStation Move Case Replacement: 2 단계, 이미지 1/3 PlayStation Move Case Replacement: 2 단계, 이미지 2/3 PlayStation Move Case Replacement: 2 단계, 이미지 3/3
    • Pinch the sides of the back panel to remove it and set it aside.

  3. PlayStation Move Case Replacement: 3 단계, 이미지 1/2 PlayStation Move Case Replacement: 3 단계, 이미지 2/2
    • Hold the base of the controller with one hand and with the other carefully pull up on the white spherical piece to remove it.

  4. PlayStation Move Case Replacement: 4 단계, 이미지 1/2 PlayStation Move Case Replacement: 4 단계, 이미지 2/2
    • Push the Lithium Ion battery from its slot to remove it.

    • Be mindful not to damage the wires or wired components, as the battery will still be attached via its connector.

  5. PlayStation Move Case Replacement: 5 단계, 이미지 1/1
    • Unscrew the 9mm screw in the battery slot with a PH #00 screwdriver.

  6. PlayStation Move Case Replacement: 6 단계, 이미지 1/2 PlayStation Move Case Replacement: 6 단계, 이미지 2/2
    • Using a plastic opening tool, carefully pry the rumble motor free.

  7. PlayStation Move Case Replacement: 7 단계, 이미지 1/1
    • Unscrew the 9mm screw behind the rumble motor slot with a PH #00 screwdriver.

  8. PlayStation Move Case Replacement: 8 단계, 이미지 1/3 PlayStation Move Case Replacement: 8 단계, 이미지 2/3 PlayStation Move Case Replacement: 8 단계, 이미지 3/3
    • Carefully pinch the plastic sides of the battery slot and lift it (along with the circuit board) from the plastic shell of the move controller.

  9. PlayStation Move Case Replacement: 9 단계, 이미지 1/2 PlayStation Move Case Replacement: 9 단계, 이미지 2/2
    • Using your fingers, carefully pry the square green piece beneath the battery slot free.

    • It is attached via white ribbons which need to be kept intact.

  10. PlayStation Move Case Replacement: 10 단계, 이미지 1/3 PlayStation Move Case Replacement: 10 단계, 이미지 2/3 PlayStation Move Case Replacement: 10 단계, 이미지 3/3
    • Follow the white ribbon attached to the part you just removed to a smaller, more rectangular piece.

    • Lift the rectangular piece from its slot to free it.

  11. PlayStation Move Case Replacement: 11 단계, 이미지 1/3 PlayStation Move Case Replacement: 11 단계, 이미지 2/3 PlayStation Move Case Replacement: 11 단계, 이미지 3/3
    • Carefully lift the entire circuit board from the black plastic encasing it.

    • Take extra care not to damage any of the wired components.

결론

To reassemble your device, follow these instructions in reverse order.

Sarah Shand

회원 가입일: 02/20/17

1,885 평판

안내서 7개 작성하였습니다

USF Tampa, Team S3-G1, Sullivan Spring 2017 USF Tampa, Team S3-G1, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S3G1

3 회원들

안내서 13개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 80