주요 콘텐츠로 건너뛰기

Sony PSone Laser Assembly Replacement

필요한 것

  1. Sony PSone Laser Assembly Replacement, Upper Case: 1 단계, 이미지 1/1
    • Remove all cables plugged into the PlayStation.

  2. Sony PSone Laser Assembly Replacement: 2 단계, 이미지 1/2 Sony PSone Laser Assembly Replacement: 2 단계, 이미지 2/2
    • Flip over the PlayStation and remove the six screws from the bottom.

  3. Sony PSone Laser Assembly Replacement: 3 단계, 이미지 1/1
    • Flip the PlayStation back.

    • There are no screws holding EVERYTHING inside the PlayStation so better hold it like a burger while flipping.

  4. Sony PSone Laser Assembly Replacement: 4 단계, 이미지 1/2 Sony PSone Laser Assembly Replacement: 4 단계, 이미지 2/2
    • Lift up and remove the upper case.

  5. Sony PSone Laser Assembly Replacement, Laser Assembly: 5 단계, 이미지 1/3 Sony PSone Laser Assembly Replacement, Laser Assembly: 5 단계, 이미지 2/3 Sony PSone Laser Assembly Replacement, Laser Assembly: 5 단계, 이미지 3/3
    • Disconnect the cables from the PSone’s board.

    • Take extreme care when disconnecting the ribbon cable from motherboard. You risk damaging the cable if you’re not careful.

결론

To reassemble your device, follow these instructions in reverse order.

다른 11명이 해당 안내서를 완성하였습니다.

Marjorie

회원 가입일: 12/23/13

2,273 평판

안내서 11개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 15

30일 전: 47

전체 시간: 5,989