물건을 수리하세요 커뮤니티 상점

Polar M400 Watch Wrist Strap Replacement

소개

This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.

필요한 것

  1. Polar M400 Watch Wrist Strap Replacement, Wrist Strap: 1 단계, 이미지 1개 중 1개

    • Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.

    번역하기

  3. Polar M400 Watch Wrist Strap Replacement: 2 단계, 이미지 2개 중 1개 Polar M400 Watch Wrist Strap Replacement: 2 단계, 이미지 2개 중 2개
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Apply an upward pressure to the holes until the locking pins release.

    • Use precision tweezers to remove the pins that connect the face with the strap.

    번역하기

  4. Polar M400 Watch Wrist Strap Replacement: 3 단계, 이미지 1개 중 1개

    • Once the pins are released, the old wrist strap should snap off.

    • Simply lock the new wrist strap into place.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

2다른 기여자 명과 함께

Timothy Rocha

회원 가입일: 09/28/17

392 평판

안내서 1개를 작성함

배지: 9

배지 +6개 더

팀

University of Maine, Team S1-G3, Diaz Fall 2017 University of Maine, Team S1-G3, Diaz Fall 2017 회원

UMAINE-DIAZ-F17S1G3

4 회원들

안내서 9개를 작성함

댓글 2개

I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?

Gustavo Fette - 답글

Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?

Olivier Grand - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 29

지난 30일: 69

전체 시간: 10,067