주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

The power is the most common issue with the Polaroid S10. This guide will show you how to replace the battery.

  1. Place an opening pick between the volume button and the back cover. More than one pick may be needed, but avoid placing more than two picks in the same space. Excessive force on the pick will break the volume button.
    • Place an opening pick between the volume button and the back cover.

    • More than one pick may be needed, but avoid placing more than two picks in the same space.

    • Excessive force on the pick will break the volume button.

    • Carefully remove the back cover using the metal spudger.

    • It is normal to hear a snapping noise due to the plastic tabs on the back cover.

  2. Use a spudger to carefully remove the tape nearest to the battery. Use caution while removing tape. Too much force can damage the device. Gently use the spudger to remove the battery out of place by wedging it out from the bottom.
    • Use a spudger to carefully remove the tape nearest to the battery.

    • Use caution while removing tape. Too much force can damage the device.

    • Gently use the spudger to remove the battery out of place by wedging it out from the bottom.

    • Do not move the battery. Moving it could cause the cables to be ripped out.

  3. Carefully desolder the 2 wires that connect the battery to the motherboard. Do not touch the soldering iron to the motherboard or the LCD screen.
    • Carefully desolder the 2 wires that connect the battery to the motherboard.

    • Do not touch the soldering iron to the motherboard or the LCD screen.

결론

Follow these instructions to reassemble your device.

다른 한 분이 해당 안내서를 완성하였습니다.

James

회원 가입일: 2015년 03월 16일

355 평판

안내서 3개 작성하였습니다

Colorado Springs, Team 1-4, May Spring 2015 Colorado Springs, Team 1-4, May Spring 2015 회원

UCCS-MAY-S15S1G4

4 회원들

안내서 13개 작성하였습니다

Can't open the %#*@ thing!!!!!!!!!!

tosaguys - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 4

30일 전: 27

전체 시간: 3,876