주요 콘텐츠로 건너뛰기

소개

This guide will show you the required steps to complete a screen replacement.

부품

지정된 부품이 없습니다.

  1. Flip the camera to back side up and open the paper/screen door.
    • Flip the camera to back side up and open the paper/screen door.

  2. Locate and remove the two 3.5 mm long screws on the inside tray. Screw head: JIS J00 Remove the inside tray.
    • Locate and remove the two 3.5 mm long screws on the inside tray.

    • Screw head: JIS J00

    • Remove the inside tray.

    • The screws are very small! Be careful not to strip or lose them.

  3. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  4. Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera. Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera.
    • Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera.

  5. Locate and remove four 3.5 mm long screws on the inside of the door. Screw head: JIS J00
    • Locate and remove four 3.5 mm long screws on the inside of the door.

    • Screw head: JIS J00

    • The screws are very small! Be careful not to strip or lose them.

  6. Once the panel is removed, the malfunctioning screen will slide out and can be replaced.
    • Once the panel is removed, the malfunctioning screen will slide out and can be replaced.

결론

To reassemble your device, follow these instructions in reverse order.

Bradley Marcum

회원 가입일: 2018년 11월 01일

217 평판

안내서 2개 작성하였습니다

IUPUI, Team S2-G1, Harley Fall 2018 IUPUI, Team S2-G1, Harley Fall 2018 회원

IUPUI-HARLEY-F18S2G1

3 회원들

안내서 2개 작성하였습니다

Where can I buy a replacement screen please?

mooi1uk - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 96