주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

The sink is one of the most overused fixtures in our lives. In this guide, the process of replacing a pop-up stopper in the bathroom sink is useful to plug the drain to fill the sink with water and to also catch any unwanted items disappearing down the drain.

도구

부품

지정된 부품이 없습니다.

  1. Place bucket directly under the sink below the pop-up assembly. Excess water may leak The pivot rod that is inserted within a hole in the pop-up extension bar. Move the pop-up extension bar away from the pivot rod.
    • Place bucket directly under the sink below the pop-up assembly. Excess water may leak

    • The pivot rod that is inserted within a hole in the pop-up extension bar. Move the pop-up extension bar away from the pivot rod.

  2. Disconnect the pivot rod from the center pop-up extension.
    • Disconnect the pivot rod from the center pop-up extension.

  3. Lift up the center pop-up rod on the faucet until it is detached. The extension rod will pull up with it. Lift up the center pop-up rod on the faucet until it is detached. The extension rod will pull up with it.
    • Lift up the center pop-up rod on the faucet until it is detached. The extension rod will pull up with it.

  4. Below the sink is the pivot nut. Turn the pivot nut counterclockwise until it is completely loose and remove from the pivot rod. Below the sink is the pivot nut. Turn the pivot nut counterclockwise until it is completely loose and remove from the pivot rod. Below the sink is the pivot nut. Turn the pivot nut counterclockwise until it is completely loose and remove from the pivot rod.
    • Below the sink is the pivot nut. Turn the pivot nut counterclockwise until it is completely loose and remove from the pivot rod.

  5. Pull the pivot rod out to expose the ball. Remove the whole pivot rod fixture. Pull the pivot rod out to expose the ball. Remove the whole pivot rod fixture.
    • Pull the pivot rod out to expose the ball. Remove the whole pivot rod fixture.

  6. In the sink, the pop-up stopper will be loose. Pull up on the pop-up stopper to separate it from the main pop-up assembly.
    • In the sink, the pop-up stopper will be loose.

    • Pull up on the pop-up stopper to separate it from the main pop-up assembly.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Brenna Stafford

회원 가입일: 2019년 10월 07일

160 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 13

전체 시간: 435