소개

Make sure laptop is powered off when working on the device. Be cautious not to damage the new screen as it may be delicate. The plastic frame around the screen is flimsy and may crack if it is not handled with care.

부품

부품은 필요하지 않습니다.

  1. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.
    • Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.

  2. Remove two 3mm screws with a Phillips #000 screwdriver. Remove two 3mm screws with a Phillips #000 screwdriver.
    • Remove two 3mm screws with a Phillips #000 screwdriver.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Wedge a blue plastic opening tool between the screen and the frame to free the screen. Do not fully remove screen as it is still attached by connector cable on bottom
    • Wedge a blue plastic opening tool between the screen and the frame to free the screen.

    • Do not fully remove screen as it is still attached by connector cable on bottom

  5. Disconnect the display cable with your fingers to fully remove the screen from the device. Disconnect the display cable with your fingers to fully remove the screen from the device.
    • Disconnect the display cable with your fingers to fully remove the screen from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Tanner Krygier

회원 가입일: 2018년 09월 17일

857 평판

안내서 5개 작성하였습니다

Washington State, Team S2-G7, Hope Fall 2018 Washington State, Team S2-G7, Hope Fall 2018 회원

WSU-HOPE-F18S2G7

3 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 4

전체 시간: 45