Porter-Cable 382 On/ Off Switch Replacement - iFixit 수리 안내서

필요한 것

1 단계 On/ Off Switch

Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 1 단계, 이미지 1/2

Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 1 단계, 이미지 2/2

First, locate the three screws on the top of the sander.
Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

2 단계

Porter-Cable 382 On/ Off Switch Replacement: 2 단계, 이미지 1/2

Porter-Cable 382 On/ Off Switch Replacement: 2 단계, 이미지 2/2

Locate your on off switch and in order to remove it you must slide it out of its slot.
This shouldnt require any special tools, just wiggle the switch up and out.
Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

3 단계

Porter-Cable 382 On/ Off Switch Replacement: 3 단계, 이미지 1/1

Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.
Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nick O'Sadcia

회원 가입일: 03/11/16

421 평판

안내서 3개 작성하였습니다

배지 +3개 더

팀

UMass Dartmouth, Team 8-7, Botvin Spring 2016 UMass Dartmouth, Team 8-7, Botvin Spring 2016 회원

UMASSD-BOTVIN-S16S8G7

3 회원들

안내서 4개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 224