Porter-Cable 382 Sander Pad Replacement - iFixit 수리 안내서

필요한 것

1 단계 Sander Pad

Porter-Cable 382 Sander Pad Replacement, Sander Pad: 1 단계, 이미지 1/1

When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.
Once the sander is upside down begin by removing your old sandpaper.
Once the sandpaper is removed locate the three screws on your sander pad.

2 단계

Porter-Cable 382 Sander Pad Replacement: 2 단계, 이미지 1/1

Remove the three, (star bolt) screws with the iFixit screw driver with a "T20" head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.
Once the screws are removed pull upward toward you and the sander pad will come apart from the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Nick O'Sadcia

회원 가입일: 03/11/16

421 평판

안내서 3개 작성하였습니다

배지 +3개 더

팀

UMass Dartmouth, Team 8-7, Botvin Spring 2016 UMass Dartmouth, Team 8-7, Botvin Spring 2016 회원

UMASSD-BOTVIN-S16S8G7

3 회원들

안내서 4개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 1,769